Dismountable heat exchangers with gasket

A gasketed heat exchanger is used to heat or cool media, where it is necessary to check and clean the interior.

The heat exchanger is assembled using a set of heat-transfer plates with gaskets, partitions and clamping plates tightened with clamping bolts. This composition is optimized for quick dismantling and reassembly of the exchanger.

Variability is provided by a range of plates of various surfaces, undulations and gaskets, which enables deployment in a wide range of applications according to the customer's requirements.

Parameters
Execution
Use
Downloads
Gallery

Dismountable heat exchangers are manufactured in size versions according to the required heat-transfer area.

Max. flow [m³/hod] from	15
Heat-transfer area [m²] from	0,3
Max. flow [m³/hod] up to	4000
Heat-transfer area [m²] up to	1866

Plate gaskets

	max. temp	use
NBR	140^oC	oil, water
EPDM	160^oC	water, steam, weak acid
VITON	180^oC	aggressive chemicals, oils
PTFE	260^oC	highly aggressive chemical
Silikon	180^oC	vegetable fat
AFM34	160^oC	oils, solvents

Dismountable heat exchangers

Model	Max. flow[m³/hod]	Heat-transfer area [m²]	Model	Max. flow [m³/hod]	Heat-transfer area [m²]
Si7	15	5,7	Si52	225	249,4
Si9	15	12,7	Si55	720	233,0
Si13	80	29,6	Si56	720	357,0
Si16	20	23,6	Si60	400	178,8
Si19	50	46,0	Si66	320	350,7
Si22	40	46,8	Si76	720	702,2
Si25	200	138,2	Si85	320	406,7
Si26	80	98,3	Si96	720	933,6
Si27	80	92,8	Si106	750	608,9
Si29	200	158,9	Si108	750	590,6
Si32	70	127,1	Si114	750	607,2
Si35	200	153,8	Si136	750	856,8
Si36	120	168,0	Si138	750	850,7
Si37	120	168,0	Si149	2000	1013,1
Si38	200	72,7	Si156	2000	1135,9
Si45	200	70,2	Si206	4000	1236,0
Si48	600	187,0	Si229	2000	1252,5
Si49	200	173,0	Si306	4000	1866,0

Heat exchangers are made of a set of panels, partitions and covers.The set of plates is made up of individual plates that are fitted with a patented mechanically fixed seal SIGMAFIX.If necessary, the set of plates includes one or more divisions, allowing the input and output of the products to the heat exchanger (multi-sectional exchangers).The covers are made of structural steel (painted surface finish), or austenitic steel (glass bead blasted surface).

Connection of the exchangers to the mountings is carried out using threaded bar, flanges, or according to the customer's requirement.

Dismountable heat exchangers operate mainly in the food and chemical industries in places where it is necessary to disassemble and clean the exchangers quickly.
Area of technology processing with the need for heat exchange.
Heating technology - transfer stations UT and TUV.
Equipmentfor reverse heat extraction (recovery).